Degrease food-industry equipment — no detergent residue in the steam step, no rinsing
At 20 bar, steam dissolves burnt grease from equipment, hoods and belts — without aggressive detergents and without the rinsing step that stops the line.

Chemical degreasers require dwell time, scrubbing and rinsing — and the residue must be removed completely before the line can restart.
In the food industry, burnt grease on hoods, griddles, belts and equipment is not just a hygiene problem but a time problem. Chemical degreasers require dwell time, scrubbing and, above all, a complete rinse before the line can restart — because no residue is allowed to reach the surfaces that touch food.
Dry steam removes the rinsing step from this chain. The heat dissolves the grease, the pressure lifts it off, and the absence of detergents means there is no longer a rinsing step. The surface stays clean and almost dry; in the right applications the line can restart sooner — we measure the time at the demonstration.
What actually decides the result on your equipment
What is almost never explained at the point of sale: pressure and steam output show the machine’s capability — how much energy it can deliver and how many operators it can supply — which is why they matter when choosing it. But they don’t by themselves tell you what result you’ll get on your surface: that depends on the application — the surface temperature actually reached, exposure time, distance, accessory, and soiling. Two machines that both say “steam” on the label can do completely different things. That’s why we test the real application, rather than recommending a machine off a single spec-sheet number.
The machine recommended below works at 20 bar (dry steam, a low-water process; the amount of condensate depends on the machine, accessory and surface). For polymerised grease that counts twice over: the heat softens it, and the small amount of water means you are not washing the grease into a puddle you then have to mop up.
Steam energy is at its maximum at the nozzle outlet and falls away with working distance — which is why distance and travel speed are set during the application test, based on the grease and the surface, not on a fixed setting. Degreasing is done up close, on the burnt-grease area itself, while delicate areas around the work zone stay outside the jet’s direct path.
Below you will find the mechanism, the relevant parameters, the recommended equipment and what it means for downtime and costs.
Consequences
What classic degreasing costs you
- !A line stopped for dwell time, scrubbing and rinsing
- !Chemical residue to remove from food-contact surfaces
- !Recurring cost of degreasers and hot water
- !Operator exposure to aggressive substances
- !Burnt grease left in hard-to-reach areas
The solution
How dry steam degreases — thermally, without rinsing
The heat of the dry steam softens and dissolves the grease, and the pressure lifts it off the surface. Because it uses very little water and no detergent, no rinse residue remains — the surface stays clean and almost dry; in the right applications the line can restart sooner — we measure the time at the demonstration.
| Parameter | Value | Role |
|---|---|---|
| Working pressure | 20 bar | Shows the machine's capability and how many operators can work at once |
| Temperature at the treated surface | measured, not calculated | Together with exposure time and distance, this is the parameter that decides the result |
| Working distance | set during the application test | Directly changes the energy that reaches the burnt grease |
| Detergents | zero / minimal | No rinsing, no detergent residue on food areas |
- Pressure and steam output show the machine's capability. The result depends on the application: the surface temperature actually reached, exposure time, distance, accessory, and soiling. That's why we test the real application.
- The heat of the steam softens and dissolves burnt grease and deposits without aggressive detergents.
- No rinsing step; in the right applications, the dead time between cleaning and restarting the line can be shorter — we measure it on your line.
- No detergent or disinfectant residue from the steam step on surfaces that touch food.
- It reaches joints, mesh and hard-to-access areas where grease accumulates.
See it for yourself
Industrial degreasing with dry steam, on site
Degresare Industrială cu Abur Uscat • Generator de Abur Uscat Menikini Steam Master • HD CleanersCommentary in Romanian.
Who it is for
The same problem, across several industries
Recommended equipment
Recommended equipment: Fortador Pro Max 20 Bar

Fortador Pro Max 20 Bar
High-pressure dry steam for degreasing equipment and hoods in the food industry — no detergent residue in the steam step, no rinsing.
Price excludes VAT and shipping costs
ROI and risk
Dead time and degreaser cost, on your figures
- Eliminate the recurring cost of degreasers
- No rinsing step — in the right applications, the line can restart faster, and we measure the time at the demonstration
- Reduce the risk of non-compliance (no detergent residue in the steam step)
- AUTONOM rental: monthly rental expenses may be tax-deductible, depending on your tax situation
Frequently asked questions
What we get asked most
Does dry steam remove burnt grease, not just fresh grease?+
Do I have to rinse after steam degreasing?+
Can I degrease without stopping the line for long?+
Equipment for your own team, or the work carried out for you?
We can discuss both, including working with the cleaning company that already serves you.
Looking for a team to carry out the work? (website in Romanian)Show us what needs cleaning.
We'll help you decide what to test first.
Send us a few details, photos or a short video of the application. Within one working day, a technical sales consultant will review it and come back with the next best step — additional questions, a first recommendation or a proposed test.