Classic washing keeps the car drying for hours. Dry steam sanitises it the same day — no detergent or disinfectant residue in the steam step
Dry steam at 16 bar and 110–135 °C lifts dirt from upholstery, plastics, wheels and the engine bay with minimal water, sanitises thermally with no detergent or disinfectant residue in the steam step and evaporates fast — so you process more cars per day without tying up your bay for hours of drying.

Classic interior washing uses a lot of water and chemicals — then the car sits for hours drying, and the bay stays blocked. Moisture left in the upholstery can promote mould and musty odours if drying is inadequate.
In a detailing centre or a car wash, productivity is everything: how many cars you process per day, at what consumable cost, and how long each one sits blocked while it dries. The classic method — lots of water, chemicals and extraction — slows you down exactly where it counts: drying time and cost per car.
Why the classic method slows you down
Classic interior washing pours water and detergent into the upholstery, then leaves the car to sit for hours drying. The moisture left in the foam and under the materials is never fully extracted — and if it does not dry out properly it can promote mould and musty odours. On top of that, every car means a new cost of chemicals and consumables, detergent residue on plastic and materials, and a bay blocked while the car dries.
What dry steam changes
Dry steam changes the equation. At 16 bar and 110–135 °C, it lifts dirt from fibres and plastic with minimal water, sanitises thermally and evaporates fast. The difference from washing with lots of water is exactly the low moisture: the interior stays clean and barely damp, not soaked, so it dries fast and is less likely to develop musty odours, provided the material is dried properly.
The same unit covers the whole interior detail — upholstery, dashboard, wheels, engine bay — with no detergent or disinfectant residue in the steam step. The Lamborghini ECO 2 R burner keeps the steam constant at a consumption of only ~0.5 l/hour, and the 9 preset programs automatically adjust pressure and temperature for each material. With the dual-operator system, two people work at once on the same car.
What it means for a detailing centre
For someone who lives on the number of cars per day, this means concretely: less drying time, less chemical cost, and a single unit instead of several pieces of equipment for interior, wheels and engine. With fewer recurring chemical consumables, the cost per car falls. And with GRENKE leasing or the AUTONOM long-term equipment rental programme, the upfront investment stays accessible for a growing business.
See the result on a real car
The simplest way to be convinced is not a promise but a demonstration: bring a car and see on its interior how the upholstery and plastic look after dry steam — and how little moisture remains. Below you’ll find the exact parameters of the recommended machine and what they mean for daily throughput and costs.
Consequences
Limitations of the conventional method
- !Long drying time → fewer cars processed per day
- !Recurring cost of chemicals and consumables on every car
- !Moisture left in the upholstery → risk of mould and odours if drying is inadequate
- !Stains and detergent residue on materials and plastic
- !A lot of water used per car, with the bay blocked
The solution
How dry steam sanitises the car interior — and why it dries fast
Dry steam brings heat with very little water: at 16 bar and 110–135 °C it lifts dirt from fibres and plastic, sanitises thermally and evaporates fast. The same unit cleans the upholstery, dashboard, wheels and engine bay — with no detergent or disinfectant residue in the steam step.
| Parameter | Value | Role |
|---|---|---|
| Steam pressure | up to 16 bar (BOOST mode) | Lifts dirt from fibres and pores, not just the surface |
| Steam temperature | 110–135 °C | Thermal sanitising — reduces bacteria and odours through heat |
| Burner | Lamborghini ECO 2 R (~0.5 l/hour) | Constant steam for long jobs, with low consumption |
| Tanks | 10 L water / 4.5 L diesel | Autonomy for several cars between refills |
| Preset programs | 9 automatic modes | Correct setting per material: interior, textiles, wheels, engine |
| Operation | 2 operators at once (dual operator) | More jobs per day with a single machine |
| Water used | minimal (dry steam) | Fast drying — the car doesn't sit blocked for hours |
- Dry steam at 16 bar and 110–135 °C lifts dirt from fibres and plastic with minimal water — the interior dries fast, it doesn't sit for hours.
- Thermal sanitising reduces bacteria and odours without disinfectants that leave residue — you work with steam and Eco Nano detergents; result: no detergent or disinfectant residue in the steam step.
- The same unit cleans upholstery, dashboard, wheels and the engine bay — one solution for the whole interior detail.
- The Lamborghini ECO 2 R burner consumes only ~0.5 l/hour and keeps the steam constant for long jobs, with no reheating pauses.
- The 9 preset programs automatically adjust pressure and temperature for each material (interior, textiles, disinfection, wheels).
- The dual-operator system lets two people work at once → more cars processed per day with a single machine.
See it for yourself
Steam auto detailing, from the first step to the last
Aparatele de curățat cu aburi Fortador: Tehnici revoluționare în Auto Detailing, direct din Polonia!Commentary in Romanian.
Who it is for
The same problem, across several industries
Recommended equipment
Recommended equipment: Fortador Sensory Ultra

Fortador Sensory Ultra
Combines the Sensory generator (16 bar, 110–135 °C, Lamborghini burner) with the mobile Volt Mini Deluxe unit for precision in tight spaces. Cleans interior, upholstery, wheels and engine with dry steam and Eco Nano detergents — no detergent or disinfectant residue in the steam step. For detailing centres and mobile services that want speed and a premium result.
Price excludes VAT and shipping costs
ROI and risk
More cars per day, lower costs
- Cut the drying time per car → more daily throughput, without the bay blocked
- Reduce part of the chemical and consumable cost — you work with steam + water
- Two operators at once → more jobs per day with a single machine
- The same unit covers interior, wheels and engine — no separate equipment to buy
- Financing: GRENKE leasing or AUTONOM rental
Frequently asked questions
What we get asked most
How do I clean the car interior without a lot of water and with no detergent or disinfectant residue in the steam step?+
Does steam damage the upholstery or the interior materials?+
How fast does the interior dry after steam cleaning?+
Can I clean the engine bay with the same machine?+
How many cars can I process per day with a single unit?+
Why do odours come back in the interior after a classic wash?+
Can the detailing equipment be financed?+
Show us what needs cleaning.
We'll help you decide what to test first.
Send us a few details, photos or a short video of the application. Within one working day, a technical sales consultant will review it and come back with the next best step — additional questions, a first recommendation or a proposed test.