Skip to content

Tell us your problem

What problem do you need to solve?

Start from the problem, not from the machine. Every page below starts from a real problem and shows exactly how we solve it: the mechanism, the parameters you can verify, the recommended equipment and what it means for cost — with fewer chemicals.

16 documented solutions

Not sure which technology fits you?Guide: how to choose the right cleaning technology →An honest comparison of all 6 technologies — what each removes, what it cannot, and what it costs to run.

Food production & HoReCa

Bottling lines · Beverages

Clean bottling lines with dry ice — no water, often without disassembly

Dry ice removes caramelised sugar, labels, adhesive and deposits from belts, fillers and sensors through a dry process — no water near electronics, often without full disassembly.

See the solution →

Degreasing · Food industry

Degrease food-industry equipment — no detergent residue in the steam step, no rinsing

At 20 bar, steam dissolves burnt grease from equipment, hoods and belts — without aggressive detergents and without the rinsing step that stops the line.

See the solution →

Food & beverage cleaning · HACCP zones & HoReCa

Reduce chemical use in food-production hygiene — and validate the result.

The goal is not to swap one product for another, but to keep a cleaning process that is controlled, repeatable and verifiable. We start from the real surface, the soiling and the hygiene target, then we test whether steam can reach the result your process requires.

See the solution →

Mould · Food production

Mould keeps coming back? Treat the surface — and find out why it returns

High-temperature dry steam can be an effective, low-water treatment for mould on compatible surfaces. But recurring mould is not just a cleaning problem: moisture, condensation, inaccessible joints, damaged materials or hygienic-design issues can matter just as much. We inspect the application first, test the surface, then recommend the process and the equipment.

See the solution →

Food production · Time & cost

Cut the time and cost of cleaning in food production — with dry steam

At 20 bar, steam dissolves grease thermally, with no detergent, no rinsing and a short drying time — a single station supplies up to 5 operators at once. In the right applications, the line can restart sooner, and we measure the real effect on your line.

See the solution →

Industry & maintenance

Fine parts & injectors · Precision cleaning

Clean injectors and complex parts with ultrasound — no mechanical scrubbing

Ultrasonic cavitation at 28 kHz generates microbubbles that lift deposits from the channels and cavities you cannot reach by hand — it cleans the part on the inside too, without mechanical scrubbing, provided the cleaning liquid can reach the area. Frequency, temperature and detergent are matched to the material and the deposit.

See the solution →

Moulds & plastic injection · Maintenance

Clean the injection mould on the machine, with less disassembly and without water

For the cavity of a mould, the method we put first is dry ice: it cleans directly on the machine, without water and without anything to rinse off. The laser stays an option — but our TIPORA range is continuous-wave fibre, and the heat a continuous laser puts into a fine cavity is a risk we discuss beforehand, not afterwards.

See the solution →

Electrical panels · Industry

Clean electrical panels and cabinets — no water, often without disassembly

Dry ice (-78.5 °C) removes dust, oil and deposits from electrical components through a dry process — no water as the cleaning medium and no secondary abrasive medium and no blasting medium to clean up afterwards; the effect on the surface depends on material, contamination and working parameters.

See the solution →

Dry ice · In-house production

Stop buying dry ice — produce it on site, with your own machine

A dry ice machine (pelletizer) produces up to 180 kg/h of pellets right at your site, when you need them — which can reduce sublimation losses between delivery, storage and use, and your dependence on a supplier.

See the solution →

Your problem is not on the list? Tell us — 25 years across six technologies, under one partner.