Cut the time and cost of cleaning in food production — with dry steam
At 20 bar, steam dissolves grease thermally, with no detergent, no rinsing and a short drying time — a single station supplies up to 5 operators at once. In the right applications, the line can restart sooner, and we measure the real effect on your line.

Cleaning with detergent and water seems cheap — until you add up the labour hours, the rinsing, the drying time the line sits idle and the monthly chemical cost. That is where the real cost hides.
For a production manager or an owner in the food industry, cleaning looks like a fixed, minor cost: detergent, water, a few hours of staff time. That is precisely why it stays unoptimised for years. But the real cost is not on the detergent invoice — it hides in the labour hours, in the rinsing, in the drying time the line sits idle, and in the consumables bought month after month.
And in the end, the result is uneven: grease and biofilm quickly return on belts and machines, and the sanitising depends on how rushed the operator was that day.
Where the time actually goes
A classic cleaning cycle has several time-consuming steps: scrubbing with detergent, rinsing, then drying before the line can restart. Each step adds minutes, and the drying time adds minutes in which nothing is produced. Multiply that by the number of sessions per month and the team’s hourly cost — that is the sum that matters, not the price of the detergent.
What dry steam changes
In the right applications, dry steam can compress these steps. It dissolves grease thermally, not through lengthy scrubbing, and the sanitising result is tested at the same time. Being dry, it usually leaves no puddles and the drying time is short; how long until the surface is ready, we measure at the demonstration.
It is worth explaining what actually decides the result, because this is where many datasheets mislead. Pressure and steam output show the machine’s capability — how much energy it can deliver and how many operators it can supply — which is why they matter when choosing it. But they don’t by themselves tell you what result you’ll get on your surface: that depends on the surface temperature actually reached, exposure time, distance, accessory and the type of deposit. Two machines that both say “steam” on the label can do completely different things, and a figure quoted without the measurement conditions tells you nothing about your process. That’s why we test the real application.
Steam energy is at its maximum at the nozzle outlet and falls away with working distance — which is why distance and travel speed are set during the application test, based on the surface and the deposit. In practice: grease removal and the sanitising result are tested in the same pass, up close.
For the decision-maker, this can reduce labour hours and can shorten stops — how much, we calculate on your figures. For the operator, it means less scrubbing and less chemical handling. A single Fortador Pro Max station supplies up to 5 operators at once, so in the right applications an entire hall can be covered within the same window between shifts — we measure it at the demonstration.
How much you save — on your figures, not on promises
We won’t give you an invented figure of the “from 2 hours to 15 minutes” kind. The real saving depends on your staff hourly cost, the number of sessions per month and how much time you now lose on rinsing and drying. That is why we propose a demonstration at your premises: we measure the current time of a session, compare it with steam and calculate the saving together on your own figures.
Below you can see the exact parameters of the station, the recommended equipment and what this change means for downtime and operating cost.
Consequences
Where the cost of classic cleaning hides
- !Labour hours for scrubbing, rinsing and drying, session after session
- !Drying time during which the line sits idle between shifts
- !Recurring monthly cost of detergents and disinfectants
- !Lots of water and wastewater to manage
- !Grease and biofilm that quickly return on belts and machines
- !Uneven results, dependent on the operator and the rush
The solution
How dry steam cleans — no detergent, no rinsing
At 20 bar, steam dissolves grease and deposits thermally, not through lengthy scrubbing. Being dry steam (a low-water process; the amount of condensate depends on the machine, accessory and surface), it usually leaves no puddles and the drying time is short. The sanitising result depends on the application — the surface temperature actually reached, exposure time, distance — which is why we test the real application. Fewer steps can mean less time and a faster restart of the line; we measure how much at the demonstration, on your line.
| Parameter | Value | Role |
|---|---|---|
| Pressure | 20 bar | Lifts the deposits off the surface |
| Temperature at the treated surface | measured, not calculated | Together with exposure time and distance, this is the parameter that decides the result |
| Steam type | dry steam, low-water process | The amount of condensate depends on the machine, accessory and surface — measured at the demonstration |
| Operators at once | up to 5 | More surface sanitised within the same time window |
| Diesel consumption | 0.6 litres/hour | Low operating cost for an industrial station |
| Boiler capacity | 11.5 litres | Autonomy for long cleaning sessions |
| Power supply | electric-diesel hybrid | Works even where you don't have enough electrical power |
- Pressure and steam output show the machine's capability. The result depends on the application: the surface temperature actually reached, exposure time, distance, accessory, and soiling. That's why we test the real application.
- The heat of the steam dissolves grease in the same step where sanitising is verified — on the real surface, not assumed from a spec-sheet number.
- Being dry steam, with low humidity, it leaves little moisture and the drying time is short; in the right applications, the line can restart sooner, and we measure the real effect at the demonstration.
- A single station supplies up to 5 operators at once, so in the right applications you can cover more surface within the same window between shifts.
- Consumption is 0.6 litres of diesel per hour and little water — low operating cost, with no recurring detergents at the thermal cleaning step.
- Fewer steps: grease dissolving and sanitising are tested in the same step, with no subsequent rinsing.
Who it is for
The same problem, across several industries
Recommended equipment
Recommended equipment: Fortador Pro Max 20 Bar

Fortador Pro Max 20 Bar
A 20 bar dry-steam station, electric-diesel hybrid, supplies up to 5 operators at once. For the daily sanitising of halls and food lines.
Price excludes VAT and shipping costs
ROI and risk
Downtime and operating cost, on your figures
- At your staff hourly cost and the number of sessions per month, a shorter cleaning cycle can translate into labour hours saved — we calculate them together on your figures
- No rinsing and a short drying time — in the right applications, the line can restart sooner after each sanitising, and we measure it at the demonstration
- Low operating cost: 0.6 l of diesel per hour and little water, with no recurring chemical consumables at thermal disinfection
- Up to 5 operators from a single station — in the right applications, you can cover a larger hall within the same window between shifts
- AUTONOM rental: monthly rental expenses may be tax-deductible, depending on your tax situation
Frequently asked questions
What we get asked most
How does steam reduce cleaning time compared with the classic method?+
Does dry steam really sanitise, not just clean?+
How much do I actually save?+
Does steam damage machines or equipment?+
Does it work even where I don't have enough electrical power in the hall?+
Does it fully replace detergents?+
In which zones and industries does it apply?+
Show us what needs cleaning.
We'll help you decide what to test first.
Send us a few details, photos or a short video of the application. Within one working day, a technical sales consultant will review it and come back with the next best step — additional questions, a first recommendation or a proposed test.