Why mill scale keeps coming back as a problem
Hot-rolled steel leaves the mill with a dark oxide layer. It looks solid, but it is brittle and it breaks away unevenly. If you paint over it, the coating follows the scale and lifts with it. If you weld through it, you invite porosity and inclusions. If you hand-grind it, you polish the surface instead of opening it, and the next primer has nothing to hold on to.
The consequence is rework on parts that were already finished, and a surface condition you cannot repeat from batch to batch.
Which technology fits, and which does not
| Technology | Fits | Does not fit |
|---|---|---|
| Sandblasting / abrasive blasting | Whole surfaces, structural steel, heavy adherent scale, creating a surface profile before painting | Thin sheet that can distort, areas where abrasive media must not enter |
| Laser cleaning (TIPORA) | Selective and local work, weld seams and weld preparation, parts where no abrasive and no secondary media are wanted | Very large areas where blasting is simply faster |
| Dry-ice blasting (CRYONOMIC) | Grease, release agents, production residue, soft layers on tools and moulds | Mill scale. Dry ice is too soft for a bonded oxide layer. Use blasting or laser instead |
| Dry steam, high-pressure water | Degreasing before and after, washing down loose material | Removing adherent scale |
Results depend on the surface, the thickness and age of the scale, and the finish you need afterwards. We will not quote a removal rate for your part before a test on your part.
What HD Cleaners does with this
HD Cleaners (Meridian Invest SRL) sells and services the equipment; we do not sell cleaning as a service. The team in Miercurea Ciuc works through the application with you first, then recommends the technology, including the case where the cheaper method is the right one.
Purchase, GRENKE leasing or AUTONOM long-term rental are available. Monthly rental costs may be tax-deductible, depending on the client’s accounting and tax situation.
“You are far from our plant”
That is a fair objection. The showroom and headquarters are in Miercurea Ciuc, and the company has traded under the same name since 2001. You can send or bring a representative part for a test, visit the showroom, ask for a test on your own application, or request an on-site demonstration where it makes sense. You receive the full technical datasheet before you decide.
Describe your problem.
Show us what needs cleaning.
We'll help you decide what to test first.
Send us a few details, photos or a short video of the application. Within one working day, a technical sales consultant will review it and come back with the next best step — additional questions, a first recommendation or a proposed test.
